Monday, December 22, 2008

Voltage Inverter

This simple circuit is a good solution to the powering a dual supply op amp from a single battery problem. The circuit simply takes a positive voltage and inverts it. It uses only one 555 timer and a few other passive components, so it doesn't add much in the way of size and cost to a project.

Schematic

Parts

R1 ---- 24K 1/4 Watt Resistor
R2 ---- 56K 1/4 Watt Resistor

C1 ---- 3300pF 25V Ceramic Capacitor
C2 ---- 47uF 25V Electrolytic Capacitor
C3 ---- 10uF 25V Electrolytic Capacitor

D1, D2 ---- 1N4148 Silicon Diode
U1 ---- 555 Timer
MISC ---- Wire, Board

Notes

1. V+ can be anywhere from 4 to 16V. -V is one volt less than V+. So for -12V output, use +13V input. The maximum current output of the circuit is about 280mA, more than enough for a few op amps.

2. For better regulation, a 79LOxx series regulator can be used.

3. A zener diode may also be used to regualte the output voltage.

0 comments:

Post a Comment

555 Timer Circuit

Power Supply

Electronic Circuit Designer.