R1 = 1 Meg, Preset Pot R2 = 10K R3,R4 = 1K C1 = 10uF, 16V C2 = 0.01uF T1 = BC547 (Gen Purp NPN) T2 = 2N2222 (Hi Current NPN) D1 = 1N4001 (Gen Purp Si) IC1 = 555 (Lo-Power version) RLA1 = Relay, 9V (amps of your choice)
Related Posts
Telephone line off-hook indicatorOff-Hook Telephone Line Indicator Figure 1 The circuit is designed to connect in parallel with the telephone line, to monitor and detect if any telephone in the same line is busy, with ... readmore
Power Supply 5V 1A by IC 7805Power Supply 5V 1A by IC 7805Source : semiconductor circuitThis circuit power supply 5V 1A by IC 7805.It easy circuit. For Digital Circuit.PCB Power Supply 5V 1A by IC 7805 ... readmore
Automatic Room LightsAutomatic Room Lights An ordinary automatic room power control circuit has only one light sensor. So when a person enters the room it gets one pulse and the lights come ‘on.’ When the person goes ... readmore
Electronic Siren CircuitDescription:An electronic siren made from discrete components. Circuit diagramNotes:The sound produced imitates the rise and fall of an American police siren. When first switched on the 10u capacito ... readmore
555 Two-Tone AlarmElectronic Project
555 Two-Tone Alarm
This project is designed to support the Hila demonstration speaker project.
Follow this link for information about getting started in electronics.
... readmore
Responsibility Disclaimer
All content on this site is provided as is and without any guarantee on any kind, implied or otherwise. We cannot be held responsible for any errors, omissions, or damages arising out of use of information available on this web site.
These circuits are provided for your own study and private use only. I will not have any responsibility for any personal injury or damage to property arising from use or abuse of the information provided on these page. Each user will be to have into account the dangers that result from the contact with the electric power, in any form.
Schematics in Schematics Depot were found on the internet and assumed to be in public domain. Contact webmaster if the copyright holder wants them pulled for any reason.
0 comments:
Post a Comment